A phone sending a message while an incoming message is blocked

Why Your eSIM Can Send Texts but Not Receive Them

Outgoing and incoming texts use different routes. Your eSIM may be able to send while the carrier still points incoming messages to an old SIM, another phone, or a blocked message service.

TLDR

  • Confirm that the eSIM includes SMS and owns the number being texted.
  • Send test messages from an iPhone and an Android phone.
  • Look in spam, blocked contacts, and unknown-sender folders.
  • Check iMessage or RCS registration after a SIM transfer.
  • Ask the carrier to refresh incoming SMS routing.

Work out which kind of text is missing

SMS is a carrier text sent to a phone number. iMessage, RCS, WhatsApp, and Signal use internet data. They can look similar in the Messages app, but they fail for different reasons.

Ask one iPhone user and one Android user to send a plain message. Do not include a photo, group chat, or link. Note the bubble color and any error on the sender’s phone. Then turn off Wi-Fi and confirm the eSIM still has mobile data.

If WhatsApp messages arrive but SMS does not, the internet connection is working and the issue is probably the number or carrier route. If SMS arrives but iMessage or RCS does not, check the app registration instead.

Use the missing message type to choose a fix
Missing itemLikely area
All SMSNumber, line status, or carrier routing
Only iPhone messagesiMessage registration
Only Android chat messagesRCS registration
Only bank codesShort-code or verification limits

Confirm that the eSIM can receive SMS on this number

Many travel eSIMs are data only. They can send messages through internet apps but cannot send or receive normal SMS. Read the plan page and look for a phone number, SMS allowance, or voice and text minutes. The uPhone eSIM data plans guide explains how these plan types differ.

Find the official number in the provider account. A number shown in phone settings may be blank or may not update after a transfer. Give the sender the full number with its plus sign and country code.

If you moved a home number to an eSIM, check whether the transfer is fully complete. During a port or SIM change, outgoing service can begin before every carrier updates the incoming route. Keep the old phone available until the carrier says the move is done.

Make sure the line stays on

Open Cellular, Mobile Service, SIMs, or SIM Manager. The line that owns the number must be enabled. Another eSIM can handle data, but turning off the numbered line also stops its carrier SMS.

Check whether the phone received and hid the messages

Open the Messages app and look for Spam, Blocked, Unknown Senders, or Archived folders. Search for the sender’s number. Remove the sender from the blocked list and ask for one new test message.

Turn off spam protection for a short test if the phone allows it. Do not leave protection off once the test ends. Also check storage. A phone with almost no free space can have trouble saving messages and attachments.

Restart the phone and use Airplane Mode for ten seconds. This renews the network registration without deleting the eSIM. If the problem began after a transfer, check uPhone’s eSIM transfer guide for any unfinished step.

Do not delete the eSIM as a message reset.

The original activation code may not work again, and message routing is often repaired on the carrier account.

Update iMessage or RCS after changing to eSIM

On iPhone, open Settings, Apps, Messages, and Send and Receive. Check whether the new or transferred number appears and has a check mark. If the number says it is waiting for activation, keep the line connected and allow time for the carrier SMS used by Apple’s activation.

On Android, open Google Messages, Settings, and RCS chats. Check the status. If the number belongs to an old phone, turn off RCS on that device or use Google’s number deactivation option before registering again.

These services can hold a number in their own system even when normal SMS has moved. That is why messages from one phone type may go to the old device. If you use two active lines, uPhone’s Dual SIM setup guide can help you keep the correct number available.

Treat missing bank and verification codes as a separate issue

Short codes and automated messages do not always work like person-to-person SMS. Some services refuse foreign or internet-based numbers. Some carriers block premium or short-code messages by default. A newly moved number may also face a short security delay.

Try a normal SMS first. If normal texts arrive but verification codes do not, ask the carrier whether short codes, application-to-person messages, or international SMS are blocked. Then ask the bank or service whether it supports the eSIM number’s country.

Keep the home SIM active if important accounts send codes to it. You can use a travel eSIM for data while receiving on the home line, but check the home carrier’s roaming fees before answering calls or sending texts.

Ask the carrier to refresh incoming SMS routing

Contact the carrier when the plan includes SMS, the number is correct, the line is on, and plain messages from more than one sender do not arrive. State that outgoing SMS works but incoming SMS fails. This tells support to check the incoming route rather than basic activation.

Give the time and number of two test senders, your phone model, current country, and whether iMessage or RCS is involved. Ask support to check SMS provisioning and refresh the line. If the number was recently ported, ask whether the port is complete on every network.

uPhone’s eSIM troubleshooting guide can help when calls, data, or signal also fail. Several broken services may point to a wider line-registration problem.

Get incoming texts working on your eSIM

Start by proving that the plan has SMS and that people are texting its real number with the country code. Check hidden folders and blocked senders, then update iMessage or RCS if messages from only one phone type are missing.

When outgoing SMS works but no plain incoming test arrives, the carrier needs to inspect routing. Keep the eSIM installed and switched on while it does that. Confirm the phone itself remains supported with uPhone’s device compatibility checker if the problem began after changing devices.